The 873CC analyzer is an economical, basic, line-powered contacting conductivity analyzer in a small form factor.
Each 873CC analyzer provides up to two contacting conductivity sensor inputs, two analog output signals (one on plastic version) (4-20 mA, 0-10 V, 0-20 mA), and two alarm relays.
A choice of plastic, panel-mount or metal, field-mount enclosure is available. Each enclosure is ¼ DIN. The metal enclosure is rated NEMA 4X, while the plastic enclosure is NEMA 12 from the front and NEMA 1 from the rear.
The 873CC offers several standard ranges from 0 to 1 uS/cm up to 0 to 20 mS/cm. It is used with 0.1 cm-1 cell factor sensors for low conductivity ranges and with 10 cm-1 cell factor sensors for ranges above 200 uS/cm.
When operating in dual sensor mode, the analyzer must be connected to two sensors of the same cell factor (either both 0.1 cm-1 or both 10.0 cm-1). When two sensors are connected, the analyzer can either report two measurements independently or can be configured to compare the two cells and report in units of % rejection or ratio.
873CC analyzers are compatible with 871CC series sensors.
